Qinlorgo 702 Generator Controller - Manual Start Panel with Keys for Backup Power, Emergency Use, and Off-Grid Applications

Specification:Descriptions: The 702 MS-HC is available in manual start versions, offering an excellent range of engine monitoring and features.The module has been designed to monitor low oil pressure, high engine temperature, over speed and a user defined auxiliary input. The DSE701 module includes a remote start input. This input allows the module to be started from a pre-defined remote location.Features:This generator controller is microcomputer control.The generator controller is started and stopped manually.With the function of LED indicating fault information.With LCD running accumulative time.With lubricating oil low pressure , the module has been designed to monitor low oil pressure.It also has the capability to monitor battery charging by utilizing the WL terminal on the alternator.When the module detects a fault condition it automatically shuts down the engine.With temperature .With engine overspeed .Specifications: Model: 702 MS-HCSize: 8.5 x 7 x 3.8cm/3.45 x 2.76 x 1.50inch Weight:157g: Hours counter provides accurate information for monitoring maintenance and periodsMultiple engine parameters are monitored simultaneously.Manual Mode : 1.The module is started using the on-board key/buttons2.The user turns the key to the palm position3. The engine pre-heat is then pressed for the required time4. The start is then pressed to start the engine5. To stop the engine the key needs to be turned to the off positionOverspeed : The engine over speed trip setting can be calibrated at the rear of the module for 50Hz or 60Hz nominal (57Hz or 68Hz trip respectively).During engine cranking and for the first 10 seconds after the engine starts running, all alarm conditions are suspended (overspeed is enabled) to allow the engine to its running speed.Package Included: 1 x 702 MS-HC Generator Controller