FVTLED 30pcs WiFi Smart LED Deck Lighting Kit - Low Voltage RGB Recessed Lights with Wireless Controller, Compatible with Alexa & Google Home, Φ1.97in - Perfect for Patio, Garden, Poolside & Outdoor Landscape Lighting

For this project, we purchased 32 step lights, installing two lights per step. We chose these over others mostly due to the ease of installation and because the lights have diffuser lenses over the LEDs, reducing the change of glare. We tried one other LED light during a test phase and found that you could see the individual LEDs as you walked up the steps, and this was just not tolerated by the homeowner. Rather than use the included power transformer, we chose instead to go with a single outdoor-rated 12v magnetic LED driver. The driver is fed from a Lutron MLV-rated dimmer switch, allowing us to adjust the lights based on the amount of light needed. We found that after dark, when the dimmer was set to 25% this was the ideal amount of light. Please note that these lights have three individual LEDs and are very, very bright.One nitpick is the screws that were included were very, very short. They are not the ones shown in the photos in the listing. We opted to not use the included screws and instead buy a 100-count box of 1/2" stainless screws from a local hardware store. That resolved the matter.Since the 12v LED driver would also be powering LED tape lighting placed under the deck railing, we needed to split the DC power. The waterproof junction box you see in the last images fit the bill perfectly. It was mounted under the top steps and provided a clean way to distribute the power. The home is in the Minneapolis area and winters here are harsh. Between the summer's high and the winter's low temperatures, we see swings of more than 120 degrees. I won't know if the lights and the junction box meet my expectations for reliability and durability...but based on my experience and the build quality evident in both, we should have a trouble-free installation.